Voltage Labels
DANGER voltage labels for panels, disconnects, junction boxes and machine cabinets. Pick the voltage, order the label. Industrial vinyl with a UV stable overlaminate, permanent adhesive, no minimum order, made and shipped from Clayton, NC.
Choose your voltage
Danger 120 Volts label
Receptacle circuits, control power and lighting branch circuits. Mark the cover so nobody assumes the box is dead.
6" x 4" die cut industrial vinyl, ANSI Z535.4 DANGER header, permanent adhesive.
Material and size specs
- Material
- Industrial pressure sensitive vinyl, 3.0 mil, with UV stable overlaminate
- Outdoor life
- Rated 5+ years outdoors, indoor and outdoor use
- Resistance
- UV, chemical, smear and tear resistant
- Standard size
- 6" x 4" die cut, landscape
- Colors
- ANSI red DANGER header, black copy on white
- Adhesive
- Permanent acrylic for painted steel, stainless, aluminum and powder coat
- Service temp
- -40F to 180F in service, apply at 45F or warmer
- Turnaround
- 1 to 2 business days in production
Mark the actual voltage, not just the hazard
A generic high voltage label tells a technician to stop. A voltage marked label tells them what they are about to be exposed to, which PPE the task calls for and whether the enclosure matches the drawing in their hand.
On mixed systems this matters most. A 277V lighting panel that looks like every 120V panel in the building is exactly where the wrong assumption happens. NEC 110.21(B) and 110.22 expect field marking that is legible and durable for the environment, and OSHA 1910.303(e) expects the equipment to be marked with the information the worker needs.
Built for panel doors and disconnect covers
These are equipment labels, not rigid wall signs. The 6" x 4" landscape format fits panel doors, disconnect covers, junction boxes, machine cabinets and gutter covers without wrapping over a hinge or a latch.
The laminated vinyl is the same stock used on our arc flash labels, so the red header stays red and the copy stays readable through washdown, UV exposure and temperature swings instead of chalking out in a season like consumer sticker stock.
Frequently asked questions
Which voltages do you stock?
Premade artwork is ready for 120V, 240V, 277V, 480V and 600V. Other voltages can be printed to order on the same material with the same DANGER header, usually with no change in turnaround.
What size are the voltage labels?
The standard printed label is 6" x 4" die cut landscape. Other printed sizes can be quoted, and engraved rigid nameplates are produced up to 4" wide.
Are these OSHA compliant?
They use the ANSI Z535.4 signal word format that OSHA 1910.145 and 1910.303 accept for hazard marking, and the laminated vinyl meets the durability expectation in 1910.303(e).
Can I put my own wording under the DANGER header?
Yes. Order a custom DANGER label and type up to three lines, for example a panel ID, a feeder source or a location along with the voltage.
Is there a minimum order?
No minimum and no setup fee on premade designs. Order one label or a few hundred.
Need a different label?
- High voltage labels
- Electrical hazard labels
- Arc flash labels
- All vinyl safety labels
- Engraved panel labels