Custom Engraved Valve Tags & Pipe ID
Round and square valve tags engraved on UL-approved two-ply acrylic. Sequential numbered sets, custom shapes, and stocked colors aligned with ANSI/ASME A13.1 piping guidelines.
Round and square tags - ANSI/ASME A13.1 colors
"Professional label plates for a very good price. I needed to label house disconnects, and was going to use a sharpie, but the 'chat' suggested a real label plate instead. Panel Label's site was easy to use, love the live preview to really see it, arrived in a few days, and adhesive was already attached. Looks nice and professional!" - Bob C
Valve Tag Styles
Match your facility's existing valve schedule, or start a new one. All tags include a standard mounting hole for beaded chain, wire, or zip tie.
Round Valve Tags
Classic round valve tag format for water, steam, gas, and chemical line identification.
Square Valve Tags
Square tags for multi-line labeling: valve number, service, and normal position on a single tag.
Pipe ID Nameplates
Engraved plates for pipe identification, direction of flow, and system labeling on mechanical rooms and plant piping.
Equipment ID Tags
Asset and equipment identification tags for pumps, motors, tanks, and skid mounted equipment.
Sequential Numbered Tags
Numbered valve tag sets for facility valve schedules and shutdown procedures.
Custom Shapes
Non-standard sizes, mounting hole patterns, and shapes engraved to your spec.
Why Engraved Acrylic Beats Brass
Stamped brass tags corrode in wet mechanical rooms, and the stamped legend fills with paint or grime until it is unreadable. Engraved Rowmark DurMark two-ply acrylic carries the legend in the material: the legend is cut through the top ply to expose a contrasting core, and the color is part of the material.
To be clear: we do not supply brass tags. We engrave two-ply acrylic only, and we offer it as the direct replacement where a brass tag would have been used. If your spec names brass, most engineers accept engraved plastic as an equal because of the color coding. See the custom valve tags guide for a side by side material comparison.
Related Products
- Custom Valve Tags Guide - brass vs engraved acrylic, sizing, and industry applications.
- Wastewater Valve Tags - tags and nameplates for water and wastewater treatment plants.
- Fire Sprinkler Valve Tags - sprinkler riser and control valve identification.
- Legend Plates - 16mm, 22mm, and 30mm plates for pushbuttons and selector switches.
- Equipment Nameplates - pump, motor, and asset ID plates in the same DurMark stock.
- UL 508A Nameplates - control panel labels for UL 508A shops.
Valve Tags - Common Questions
What material do you use for valve tags?
Two-ply Rowmark DurMark acrylic, UL Approved under Yellowcard file E354751. The engraved legend is cut through the top ply to expose a contrasting core, so there is no printed surface to peel or wear off.
How do the tags mount to valves?
Standard valve tags include a mounting hole for beaded chain, wire, or zip tie. Send us the preferred hole size and location in the notes and we will match it.
What colors are available?
Yellow/Black, Red/White, Black/White, Green/White, Blue/White, Orange/White, and White/Black. Match ANSI/ASME A13.1 pipe marking colors by service (blue for potable water, green for cooling water, yellow for hazardous, and so on).
Do you sell brass valve tags?
No. We do not supply brass tags. Everything we engrave is two-ply Rowmark DurMark acrylic, which we offer as the modern replacement for stamped brass: the legend stays legible because it is cut through the top ply into a contrasting core, and the tag itself can carry the ANSI/ASME A13.1 service color that brass cannot.
Can you do sequential numbered tag sets?
Yes. Send the number range and any prefix/suffix and we will engrave the whole set. Upload a spreadsheet in the designer for large runs.
How fast do tag orders ship?
Most valve tag orders engrave and ship within 1-2 business days from Clayton, North Carolina.
Ready to Order Valve Tags?
Live preview, instant pricing, ships in 1-2 business days.