Equipment Nameplates Engraved To Order
Custom engraved equipment nameplates for machines, motors, pumps, control panels, and asset identification. Permanent engraved legends on UL-approved 2-ply acrylic. Part of our full line of custom engraved electrical panel labels.
Mounting holes shown - 3M adhesive backing also available
Nameplates that outlive the equipment
Printed asset labels fade, curl, and get scrubbed off by plant cleaners. An engraved nameplate carries the legend in the material itself: the top cap layer is cut away to expose a contrasting core, so there is no printed surface to peel or wear off.
We engrave every plate to order in Clayton, North Carolina, on UL-approved industrial acrylic, the same material used for UL 508A control panel nameplates and engraved valve tags.
Equipment nameplate specifications
Material | Rowmark DurMark rigid 2-ply acrylic, 1/16" thick
Certification | UL Yellowcard E354751, UL94-HB flame rated
Text height | 1/4" to 1", up to six lines per plate
Max size | 18" wide x 6" tall
Colors | Seven standard two-ply combinations
Mounting | Drilled holes, 3M adhesive backing, or both
Production | 1-2 business days, made in Clayton, NC
Where engraved nameplates are used
Control panel nameplates
Disconnects, starters, VFDs, and enclosure ID for UL 508A builds.
Machine and motor ID
Equipment numbers, service data, and maintenance identification.
Legend plates
Pushbutton, selector switch, and pilot light legends.
Valve and pipe tags
Round and square hanging tags with mounting bores.
Panel and breaker labels
Circuit ID and panel schedules per NEC 408.4.
Arc flash and hazard plates
NEC 2026 and NFPA 70E compliant warning identification.
Equipment nameplate FAQ
What are equipment nameplates used for?
Equipment nameplates identify machines, motors, pumps, panels, and assets with permanent engraved text: equipment numbers, service data, voltage, asset IDs, and maintenance information. Because the legend is cut into the material through the cap layer rather than printed, there is no printed surface to peel or wear off.
What material are your equipment nameplates made from?
Every nameplate is engraved from Rowmark DurMark, a UL-approved rigid 1/16" 2-ply acrylic carrying UL Yellowcard E354751 and a UL94-HB flame rating. It is non-conductive, UV stable and listed for interior and exterior use.
Do you offer metal or aluminum equipment nameplates?
We do not supply metal or anodized aluminum plates. We engrave UL-approved 2-ply acrylic, which is non-conductive, will not corrode, and is the material most control panel and UL 508A specifications call out for equipment identification.
Can I put my own wording on these nameplates?
Yes. Every nameplate is made to order with your exact text, line count, size, and color combination. Lay it out in the custom label designer and see live pricing before you order.
How are equipment nameplates mounted?
Choose mounting holes for screws or rivets, or 3M adhesive backing for a fast permanent bond to clean metal, plastic, or painted surfaces. Radius corners are available on request.
What sizes and colors are available?
Nameplates run from 1" x 3" up to 18" wide and 6" tall, with text heights from 1/4" to 1" and up to six lines. Seven standard color combinations are stocked: yellow/black, red/white, black/white, green/white, blue/white, orange/white, and white/black.
Spec your equipment nameplates in 60 seconds
Instant pricing, no quote required, ships in 1-2 days.